| CORNER
BEADS |
PRODUCT
NUMBER
|
FINISH
THICKNESS |
INSU- LATION
THICKNESS |
DIM |
PIECES
PER BOX |
|
|
CB138E |
1/16 |
ALL |
1-3/8"
x 1-3/8", perforated flanges. |
100 |
| (8',
10') |
|
|
|
|
Corner
Bead - Designed by Vinyl Corp. to be used
in EIFS PB wall and ceiling systems. This new
design has larger perforations allowing matrix
to easily flow thru and anchor to substrate. Reinforcing
the corner. Used for those conditions when a more
durable corner is required.
Conforms
to ASTM D1784-81 cell classification 13244C
|
|
| CB158E |
1/16 |
ALL |
1-5/8"
x 1-5/8", perforated flanges. |
75 |
| (8',10') |
|
|
|
|
Corner
Bead - Designed by Vinyl Corp. with slightly
wider flanges, but with all of the features of
the CB138E.
Conforms
to ASTM D1784-81 cell classification 1344C
|
PB STARTER STRIP/CASING BEADS
"PATENT NUMBER"
5,003,743
|
PRODUCT
NUMBER
|
FINISH
THICKNESS |
INSU- LATION
THICKNESS |
DIM |
PIECES
PER BOX |
|
|
CBS75-16 |
1/16 |
3/4 |
2"
back flange, 5/8" perforated flange |
50 |
| CBS100-16 |
1/16 |
1 |
45 |
| CBS150-16 |
1/16 |
1-1/2 |
40 |
| CBS200-16 |
1/16 |
2 |
26 |
|
EIFS
PB Starter Strip/Casing Beads - Designed by
Vinyl Corp. as a base support starter strip or
perimeter casing bead for exterior insulated wall
and ceiling systems. Perforated flange allows
matrix to easily flow thru and anchor to substrate.
All have Vinyl CorpÕs patented ÒKey LockÓ splice
to reinforce butt joints. Caulk all Intersections,
Butt Joints and Ends.
Conforms
to ASTM D1784-81 cell classification 13244C
|
PB STARTER STRIP/CASING BEADS (with
drip)
"PATENT NUMBER"
5,003,743
|
PRODUCT
NUMBER
|
FINISH
THICKNESS |
INSU- LATION
THICKNESS |
DIM |
PIECES
PER BOX |
|
|
CBS75-16D |
1/16 |
3/4 |
2"
back flange, 5/8" perforated flange, with drip leg. |
45 |
| CBS100-16D |
1/16 |
1 |
40 |
| CBS150-16D |
1/16 |
1-1/2 |
35 |
| CBS200-16D |
1/16 |
2 |
25 |
|
EIFS
PB Starter Strip/Casing Beads (With Drip) -
Designed by Vinyl Corp. as a base support starter
strip with drip leg for exterior insulated wall.
Perforated flange allows matrix to easily flow
thru and anchor to substrate. Drip leg moves moisture
away from openings or foundation wall. All have
Vinyl Corp.'s patented "Key Lock" splice
to reinforce butt joints. Caulk all Intersections,
Butt Joints and Ends.
Conforms
to ASTM D1784-81 cell classification 13244C
|
PB
STARTER STRIP/CASING BEADS (reinforced)
"PATENT NUMBER"
5,003,743
|
PRODUCT
NUMBER
|
FINISH
THICKNESS |
INSU- LATION
THICKNESS |
DIM |
PIECES
PER BOX |
|
|
PRE
100-16 |
1/16 |
1 |
1"
back flange, 1-1/8" perforated flange. |
60 |
| PRE
150-16 |
1/16 |
1-1/2 |
40 |
| PRE
200-16 |
1/16 |
2 |
25 |
|
EIFS
PB Prefabricated Panel Edge - Designed
for systems that are amnufactured into panels
for job installation. Vinyl Corp.'s patented "Key
Lock" reinforces butt joints.
Conforms
to ASTM D1784-81 cell classification 13244C
|
PB
CONTROL JOINT
(surface application/with removable
tape)
|
PRODUCT
NUMBER
|
FINISH
THICKNESS |
INSU- LATION
THICKNESS |
DIM |
PIECES
PER BOX |
|
|
CJV-16E |
1/16 |
ALL |
3/16"
"V" REVEAL 1-1/8" perforated flanges. |
60 |
|
EIFS
PB Control Joint (With Removable Tape) - Designed
by Vinyl Corp. to relieve stress, caused by expansion
and contraction, in large areas of walls and ceilings.
Tape protects Deep "V" expansion slot
during construction. Large perforations allow
matrix to easily flow thru and anchor to substrate.Recommended
usage is for every 130 -140 sq. ft, with no one
side being longer than 15 ft. Caulk all Intersections,
Butt Joints and Ends.
Conforms
to ASTM D1784-81 cell classification 13244C
|
OVERVIEW
